- Have any questions?
- 91-22-23726950
- 91-22-23774610
Vanadyl Sulfate
May 10, 2019
Zinc Benzoate
May 10, 2019
Zinc Ammonium Chloride Flux
Muby Chemicals established in the year 1976, is pioneer in Manufacturing Chemicals for Oil and Gas Exploration, Hydraulic Fracturing (Fracking) and coiled tube Chemicals.Our advanced chemistry leading to an innovative and high-performance product range is coupled with effective on and off site management services.
We are manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavorchemicals in India, which are of IP, BP, USP, Ph. Eur., FCC or Food Grade, ACS, AR or Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals.
The product is offered as Mono, Double, Triple and Quad Salt
| Type of Salt | Ammonium Chloride Number (ACN) |
| Zinc Ammonium Chloride Mono Salt (ZnCl2.NH4Cl) Minimum Zn Content 34.3% | 0.39 |
| Zinc Ammonium Chloride Double Salt (ZnCl2.2NH4Cl)Minimum Zn Content 26.7% | 0.79 |
| Zinc Ammonium Chloride Triple Salt (ZnCl2.3NH4Cl)Minimum Zn Content 21.9% | 1.18 |
| Zinc Ammonium Chloride Quad Salt (ZnCl2.4NH4Cl)Minimum Zn Content 18.6% | 1.57 |
We are manufacturers of Zinc Chloride & Ammonium Chloride. We can offer the following proprietary products of Zinc Ammonium Chloride Galvanizing Flux
Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Wet Flux applications
( LOW FUMING and COST EFFECTIVE ); Grade: AMIPM
Packed in 50 Kg HDPE bags
Zinc Ammonium Chloride based Proprietary Galvanizing Flux in Powder form for Dry Flux applications
( LOW FUMING and FAST DRYING ); Grade: AMILI
Packed in 50 Kg HDPE bags
Zinc Ammonium Chloride based Proprietary Galvanizing Flux as 20-25 Baume Liquid
( PIPE GALVANIZING ); Grade: AMILIPI
Packed in 200 Kg HDPE Barrels
AMIPM is a proprietary Galvanizing Flux based on Zinc Ammonium Chloride. It is LOW COST formulation for reduced fuming and typically used for continuous galvanizing lines (or new flux charge in a batch process). AMIPM is the preferred multi-component, cost-effective formulation. Zinc Ammonium Chloride based Proprietary Galvanizing Flux is extensively used in continuous sheet galvanizing lines as it contains special additives that offer high luster to galvanized products without the typical Sulphide smell that other high luster fluxes bear. Our Galvanizing Flux optimum melting point cleans the sheet before it enters the zinc bath, ensuring strong and uniform adhesion.
AMILI Zinc Ammonium Chloride Galvanizing Flux is formulated for high speed, low fuming, negligible ash and most importantly thin, strong and uniform Zinc coats. Use of our proprietary additives ensures that the flux dries to a simple film, which protects and seals the fluxed steel. Due to the improved fluxing action and a thinner lighter film, the flux dries up faster. The dryer the article to be galvanized is, the quieter it enters the kettle, hence less zinc is splattered about.
The uniform film that is formed over the article to be galvanized due to our special additives, acts as a protective layer over the Iron, ensures that less iron is introduced into the kettle, reducing dross formation.
